EnGenius EWS1025CAM, Руководство пользователя

Страница: 47 / 144

47
System Properties
Device Name : Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not
broadcast to other devices.
Region : Select Region to conform to local regulations.
Band Steering
: Send 802.11n client to the 5GHz band, where 802.11b/g clients cannot go and leave 802.11b/g clients in 2.4GHz
to operate their slower rate. Band Steering works within the Access Point by directing 5GHz-capable clients to the band.
EnGenius Band Steering supports following advanced settings,
*Prefer 5GHz
: When band steering is configured to Prefer 5GHz mode, the AP will steer dual band capable client devices to 5GHz
radio when the RSSI value of these client devices on 5GHz radio is more than set one. The allowed RSSI value for default setting is
-75dBm.
*Force 5GHz
: When band steering is configured to Force 5GHz mode, the AP will not dual band capable client devices to network to
the 2.4GHz band only if the client devices are not currently associated on 2.4GHz radio in this AP.
*Band Balance
: When band steering is configured to Band Balance mode, the AP will steer dual band capable client devices to 5GHz
when the RSSI value of these client devices on 5GHz radio is more than set one. To evenly allocate RF resource on the both 2.4GHz
and 5GHz radios, users also can set the portion of client devices on 5GHz radio to assure smoothly connection. The default value of
the 5GHz radio is 75%.
Save
: Click
Save
to confirm the changes.
Note : When enable band steering function, both 2.4GHz and 5GHz SSID and security setting must be the same.