Quick Start Guide
0
.
1
.
v
e
d
i
u
G
t
r
a
t
S
k
c
i
u
Q
2
s
n
o
i
t
c
u
r
t
s
n
i
e
t
e
l
p
m
o
c
r
o
f
l
a
u
n
a
M
s
’
r
e
s
U
o
t
r
e
f
e
R
EOC5510
802.11
a
Wireless Access Point & Clent Bridge
3.
Country/Region
: Select the region from the
drop-down list.
4.
Opera
ti
on Mode
: Select
Access Point,
Client Bridge, Client Router
or
WDS
radio
bu
tt
on.
5.
Click on the
Apply
bu
tt
on to save the
changes.
IP Se
tti
ngs
1.
Click on the
IP Se
tti
ngs
link on the
System
sec
ti
on
. This feature allows you
to con
fi
gure the LAN interface using a
sta
ti
c IP address or as a DHCP client.
This IP address is also used to access the
web-based interface.
2.
IP Network Se
tti
ng
: Select
Obtain an IP
address automa
ti
cally (DHCP)
radio
bu
tt
on if the Access Point is connected
to a DHCP server. This will allow the
Access Point to pass IP addresses to the
clients associated with it. Or You may
select
Specify an IP Address
radio
bu
tt
on if you would like the device to
use a sta
ti
c IP address. In this case, you
would be required to specify an IP
address, subnet mask, and default
gateway IP address.
3.
IP Address
: Specify an IP address
4.
IP Subnet Mask
: Specify the subnet
mask for the IP address
5.
Default Gateway
: Specify the IP address
of the default gateway.
6.
Click on the
Apply
bu
tt
on to save the
changes.
Note
: If you change the IP address here, you
may need to adjust your PC’s network se
tti
ngs
to access the network again.
Wireless Network & Security
1.
Click on the
Wireless
Network
link on
the
Wireless
sec
ti
on
. This feature allows
you to con
fi
gure the wireless mode,
channel, SSID, and security se
tti
ngs.
2.
Wireless Mode
: 802.11a
3.
Channel
: Select a channel from the
drop-down list. The channels available
are based on the country’s regula
ti
on.
4.
You may con
fi
gure up to four di
ff
erent
wireless pro
fi
les. Click on the
Edit
bu
tt
on to modify the pro
fi
le and place a
check in the Enable box to ac
ti
vate the
pro
fi
le.
5.
SSID
: The SSID is a unique named shared
amongst all the points of the wireless
network. The SSID must be iden
ti
cal on
all points of the wireless network and
cannot exceed 32 characters.
6.
VLAN ID
: If you have enabled VLAN
tagging on your network, specify the
VLAN tag ID.
7.
Suppressed SSID
: Place a check in this
box if you would like to hide the SSID. By
enabling this feature, wireless clients
will not be able to scan this access point
in a site survey.
8.
Sta
ti
on Separator
: This is also known as
layer 2 isola
ti
on. Clients connected to
this Access Point will not be able to
directly communicate with each other.
9.
Security Mode
: By default, the security
is disabled. Refer to the user’s Manual
to con
fi
gure the security features such
as WEP, WPA, WPA-PSK, WPA2,
WPA2-PSK and WPA-Mixed.
10.
Click on the
Apply
bu
tt
on to save the
changes
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
