EnGenius ENS500-ACv2, Руководство пользователя

Страница: 23 / 71

To attach the ENS500-ACv2/ENS500EXT-ACv2
to a wall using wall mounting kit.
A. Determine where the Access Point to be placed and
stick the Adhesive label on the surface.
B. Use the appropriate drill bit to drill two 8.1mm
diagramand 26mmdepth holes on the markingsof the
label.
C. Removethe label andscrewthe anchorsunto the holes
until they areflush with the wall.
D. Screw the included screws into the anchors. Place the
AccessPointagainstwallwiththemountingscrewheads.
To attach the ENS500EXT-ACv2 to a pole using
the provided pole mounting kit:
A. Thread the open end of the Pole Strapthrough the two
tabs on the Pole Mount Bracket.
B.Lockandtighten PoleStrapto securePoleMountBracket
to thepole.
23