background image

[email protected]

Local: (+971) 4 339 1227

North America

Technical Support

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary 

depending on many factors including environmental conditions, distance between devices, 

radio interference in the operating environment, and mix of devices in the network. Features 

and specifi cations subject to change without notice. Trademarks and registered trademarks 

are the property of their respective owners. For United States of America: Copyright © 2020

EnGenius Technologies, Inc. All rights reserved.

Notes

ENH500

A)

B)

Thread the open end of the Pole Strap through the two tabs on 
the Pole Mount Bracket.
Lock and tighten Pole Strap to secure Pole Mount Bracket to the 
pole.

Pole Mounting

A

B

C

D

A)

  

B)

  

C)

  

D)

  

Plug the dynamic stick into the bracket.

Screw the sealing nut and assembled parts, tighten it 

with 

80kgf.cm.

Put the nock washer on the dynamic stick.
Assemble the mounting parts to the device.

E

F

F)

E)

Thread the open end of the pole strap through the two  tabs on 
the bracket.
 Lock and tighten pole strap to secure bracket to the pole.

EnStation5-AC / EnStationAC

F

G

E

Determine the mounting location. Mark and drill two pilot
holes aligning to the screw holes of the bracket.
Put wall anchors into the holes and insert screw into the 

wall anchor. 
Screw and secure the bracket in place.

E)  

F)  

G)  

ENH500

Determone where the Access Point to placed and stick the 
Adhesive label on the surface.

Use the appropriate drill bit drill teo 8.1 mm diagram and 26 mm 

depth holes on the markings of the label.
Remove the label and Screw the anchors unto the holes until 

they are flush with the wall.

Screw the includes screws into the anchors. place the Access 
Point against wall with the mounting screw heads.

A)

B)

C)

D)

A

B

C

5

Mounting the Device

Wall Mounting

A)  
B)  

C)  
D)  

Plug the dynamic stick into the bracket.

Screw the sealing nut and assembled parts, tighten it with 

80kgf.cm.

Put the nock washer on the dynamic stick.
Assemble the mounting parts to the device.

A

B

C

D

EnStation5-AC / EnStationAC

Отзывы: