Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wifiabc.com
Disclaimer: Information may be subject to changes without prior notification.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
ENH710EXT
ENH710EXT setup
1. To configure ENH710EXT, open a web browser (example: Microsoft Internet
Explorer, Mozilla Firefox, Google Chrome, etc.)
2. In the adress bar of the web browser, enter:
192.168.1.1
(the default IP
address of the ENH710EXT) and hit
ENTER
.
3. A login screen will appear. By default, the username of the ENH710EXT is
admin
and the password is
admin
. Enter the current username and password
of the ENH710EXT and then click ‘
Login
’. Refer to the ENH710EXT user
manual on how to change the username and password.
4. After clicking ‘
Login
’ with the correct username an password,
the ENH710EXT main menu will appear. If you are successful, proceed to
setting up the wireless connection.
Switching between operating modes
This device can operate in the following modes: Access point, Client bridge,
WDS AP, WDS bridge and WDS station
A. Click on the operation mode link under the system navigation drop-down
menu.
B. Operating mode: Select an operating mode from the list (Access point, Client
bridge, WDS AP, WDS bridge or WDS station) and then click on the ‘Apply’
button.
C. All basic setup is completed. Note: The wireless connection is not secure. To
setup security on the ENH710EXT, refer to the ENH710EXT user manual.
