background image

73

Appendix D - Professional installation instruction

Installation Personal 

This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The 
general user shall not attempt to install or change the setting.

Installation Location 

The product shall be installed at a location where the radiating antenna can be kept 41cm from nearby person in normal operation condition to 
meet regulatory RF exposure requirement.

External Antenna 

Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive 
RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited.

Installation Procedure

Please refer to user’s manual for the detail.

                       

Warning: 

                            Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant 
rules. The violation of the rule could lead to serious federal penalty.
The maximum e.i.r.p. at any elevation angle above 30 degrees as measured from the horizon must not exceed 125 mW (21 dBm).

Содержание ENH1750EXT












































































Отзывы: