EnGenius EMD1AP Скачать руководство пользователя | Manualshive

Страница: 60 / 62

background image

60

Industry Canada Statement

This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems;

(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.

(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz
and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire
les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.

(iii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.

Appendix B - IC Interference Statement

«
...
58
59
60
61
62
»

Содержание EMD1AP































































Отзывы:

Нет отзывов

Похожие инструкции для EMD1AP

Бренд: Cambium Networks Страницы: 196

Бренд: Cambium Networks Страницы: 478

Бренд: Cambium Страницы: 301

Бренд: Cambium Networks Страницы: 287

Бренд: Ebyte Страницы: 11

WL-ICNAP48F-060

Бренд: Mach Power Страницы: 22

Бренд: TRENDnet Страницы: 44

Бренд: TP-Link Страницы: 2

Бренд: CNET Страницы: 2

Бренд: ICP DAS USA Страницы: 61

Бренд: P1 Страницы: 10

Бренд: Advantech Страницы: 46

Бренд: Speco Страницы: 4

Бренд: 4IPNET Страницы: 17

Бренд: Nimbus Water Systems Страницы: 10

Бренд: Proxim Страницы: 32

Internet BWA System 3200

Бренд: Nortel Страницы: 68

Бренд: Linksys Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды