address as
255.255.255.0
. (Select
Use the following IP Address
radio button). Once the
computer has been prepared, proceed to setting up the ECB300.
ECB300 Setup
1)
To configure ECB300, open a web browser (
example:
Microsoft Internet Explorer, Mozilla Firefox,
Google Chrome, etc.).
2)
In the address bar of the web browser, enter
192.168.1.1
(the default IP address of the ECB300)
and hit enter.
3)
A login screen will appear. By default, the username of the ECB300 is
admin
and the password is
admin
. Enter the current username and password of the ECB300 and then click
Login
. Refer to
the ECB300 user manual on how to change the
username and password.
4)
After clicking
Login
with the correct username and
password, the ECB300 Main Menu will appear. If you are
successful, proceed to setting up the wireless connection.
Switching Between Operating Modes
This device can operate in the following modes: Access Point, Client Bridge, WDS, Repeater, AP Router.
1)
Click on the
Operation Mode
link under the
System
navigation drop-down menu.
2)
Operating Mode
: Select an operating mode from the list (Access Point, Client Bridge, or Repeater)
and then click on the
Apply
button.
3)
All basic setup is completed.
Note: The wireless connection is not secure. To setup security on the
ECB300, refer to the ECB300 User Manual.
http://192.168.1.1
