Computer Setup
1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is
on.
2) For the next steps, refer to your Operating System User Manual.
3) Once your computer is on, ensure that your TCP/IP is set to
On
or
Enabled
. (In the control panel,
double click Network Connections and then double click on the connection of your Network
Interface Card (NIC). Select
Internet Protocol (TCP/IP)
and then click on the
Properties
button.)
4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on
the interface (or Ethernet card that will use the EAP150) as
192.168.1.21
and the Subnet Mask
address as
255.255.255.0
. (Select
Use the following IP Address
radio button). Once the
computer has been prepared, proceed to setting up the EAP150.
EAP150 Setup
1) To configure EAP150, open a web browser (
example:
Microsoft Internet Explorer, Mozilla Firefox,
Google Chrome, etc.).
2) In the address bar of the web browser, enter
192.168.1.1
(the default IP address of the EAP150)
and hit enter.
3) A login screen will appear. By default, the username of the EAP150 is
admin
and the password is
admin
. Enter the current username and password of the EAP150 and then click
Login
. Refer to
the EAP150 user manual on how to change the
username and password.
4) After clicking
Login
with the correct username and
password, the EAP150 Main Menu will appear. If you are
successful, proceed to setting up the wireless
connection.
Wireless Setup
1) To setup the wireless connection, select
Wireless
on the
main menu. After selecting
Wireless
, select
Basic
.
2) Ensure that the
Radio
is set to
Enable
.
3) Select the wireless band you want (by default, it is set to
2.4 GHz B+G+N
).
4) Enter the number of Wireless Points by changing the value in
Enabled ESSID#
.
5) Name the wireless connection by entering the name in the fields:
ESSID1
,
ESSID2
,
ESSID3
,
and/or
ESSID4
. (Note: This only applies if you have multiple SSID).
http://192.168.1.1
