EnGenius EAP1200H, Руководство пользователя

Страница: 28 / 63

28
Operation Modes
The EAP1200H supports three operating modes:
Access Point, WDS AP, and WDS Bridge.
Device Settings
To access operation mode, click the Wireless section under
Network in the sidebar. You will see wireless settings
customizable options for both the 2.4 GHz and 5 GHz
modes. Under Wireless settings, you will see:
Device Name:
Enter a name for the device. The name you
type appears in SNMP management. This name is not the
SSID and is not broadcast to other devices.
Country/Region: Select a Country/Region to conform to
local regulations.
Operation Mode: Use the radio button to select an
operating mode.
Band Steering: Enable Band Steering to sends 802.11n
clients to the 5 GHz band, where 802.11b/g clients
cannot go, and leaves the 802.11b/g clients in 2.4 GHz to
operate at their slower rates. Band Steering works within
the Access Point by directing 5 GHz-capable clients to
that band.
*Note: In order for the Band Steering function to work
properly, both the 2.4 Ghz and the 5 GHz SSID and security
settings must be under the same selection settings.
Basic
This page allows you to modify the device’s IP settings.