Engelmann Sensor GmbH,
Rudolf-Diesel-Straße 24-28, D-69168 Wiesloch-Baiertal, Germany
Page
4
of
23
Manual Gateway Device Monitor Version: V 1.2 / 2018_07_10 Subject to technical change!
1
Overview
1.1
About this document
This document based on the Device Monitor 2.16, for the Firmware version 2.1.4 of the Gateways.
1.2
Gateway activities
The Gateway was designed to provide our customer with meter data from his estates using electronical
transfer methods.
The Gateway is in standby mode most of the time and wakes up on customer selected times to process
scheduled tasks.
1.
Collect and filter (according to White- and Blacklist) wireless M-Bus telegrams and store it into non-
volatile FLASH-Memory of the Gateway.
2.
Decode (AES) and format (file format) the data from non-volatile FLASH memory and upload the
output to an FTP Server.
3.
Decode (AES) and format (file format) the data from non-volatile FLASH memory and send the
output via an SMTP server to an E-mail box.
4.
Wait a certain time for configuration massages (SMS), progress them and send out an answer.
1.3
Configuration of the Gateway
The Gateway can be configured via USB or SMS. As soon as the gateway is connected to an USB port, it is in
the configuration mode. The configuration mode is terminated after the USB port is disconnected from the
Gateway.
Caution: No scheduled tasks are performed in the USB configuration mode!
1.4
Device Monitor activity
The Device Monitor is the graphic user interface for the Gateway's command interpreter. All functions of the
gateway can be used and the corresponding SMS commands can be read out.
