Engel MT35F-G4ND-V, Руководство пользователя

Страница: 12 / 28

- 11 -
displayed once the LED lights up. When the "KNOB" is turned, the
setting temperature will continuously change the range of the
temperature. After pre-setting the temperature, the LED display will
stop blinking (after a few seconds), indicating the temperature has
been set (locked).
5. Installation and Ventilation
The refrigerator shall be used in a dry area where there is no
chance of being exposed to water splash or other types of liquids or
direct sunlight or heat conducted from hot pipes, warm air outlets,
cookers, etc.
The refrigerator should be positioned and secured on a solid surface
in the vehicle.
Keep the refrigerator away from direct sunlight or a gas stove or
heater or heat generating refrigerator.
Avoid installing your refrigerator close to hot water lines or warm air
ducts.
Adequate ventilation and suitable distance from each wall (at least
SELECTING TEMPERATURES (°C or °F )
It is possible to select between Centigrade of Fahrenheit with your
ENGEL.When the " MODE " button is pressed once, the display will
blink and display the temperature the unit has been set too.
The temperature can be changed from °C to °F by pressing whilst
the display is blinking the " SELECT " button. After pre-setting the
temperature, or changing from °C to °F , the LED display will stop
blinking (after few seconds), indicating the temperature has been
set (locked).
150 mm) will enable optimized cooling performance and minimized
power consumption.
Temperature range - Achievable temperature from -18 to 10°C,
The setting temperature is displayed when the LED starts blinking.
The current temperature at the centre of the fridge will be