ENFORCER VIDEO DISTRIBUTOR
4
SECO-LARM U.S.A., Inc.
Power LED indicator not lit
• Make sure power is connected to the distributor.
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: sales
@
seco-larm.com
MiVA-110xB-
Troubleshooting:
Video Distributor does
• Make sure the power, input and output cables are
not function correctly
connected firmly to the
distributor.
• Make sure the video input device is turned on.
• Make sure the video output device is turned on.
• Test the coaxial cable between the video source and the
distributor to make sure it is functional.
• Test the coaxial cable between the video display and the
distributor to make sure it is functional.
PITSW4
Also Available from
SECO-LARM
:
Passive VGA Balun
Passive Video Balun
Video Amplifier
EVT-PB1Q
EVT-SBP-GQ
VA-2101B-WQ
SECO-LARM has a complete line of security products.
Please visit www.seco-larm.com for more information.
