ENFORCER 4K HDMI Switchers
2
SECO-LARM U.S.A., Inc.
The ENFORCER 4K HDMI Switchers allow easy switching between multiple HDMI sources. The
switchers work with most HDMI devices, delivering the very best in digital audio and video signals
with HD resolutions of up to 4K/2K. An included remote control easily switches between HDMI
sources. LED Indicators clearly display the HDMI source being used. The switcher will automatically
select the active input for added convenience. The 4K HDMI Switchers can be daisy chained up to
four levels for even more inputs.
Introduction:
Model
MVS-AH31-01NQ
MVS-AH51-01NQ
Type
HDMI Switcher
Input video signal
3.3V
Input DDC signal
5Vp-p (TTL)
Maximum single link range
4K*2K@30hz
Deep color
48bit
Video formats supported
High-speed HDMI, HDCP 1.4
Audio formats supported
LPCM, Dolby-AC3, DTS7.1, DSD
Output video
HDMI
Resolutions supported
4K/1080p/1080i/720p/576p/576i/480p/480i
Video amplifier bandwidth
10.2Gbps
Video input connector
3x HDMI Type A 19-pin female
5x HDMI Type A 19-pin female
Max. input cable length
24AWG (15m), 26AWG (10m), 28AWG (5m)
Video output connector
1x HDMI Type A 19-pin female
Max. output cable length
24AWG (15m), 26AWG (10m), 28AWG (5m)
IR pass-through
38kHz
Operating voltage
5VDC
Power supply
USB Power
ESD protection
±8kV (air-gap discharge), ±4kV (contact discharge)
Current draw
150mA@5VDC
250mA@5VDC
Operating temperature
32°~104° F (0°~40° C)
Operating humidity
20~90% RH (no condensation)
Dimensions
3
7
/
16
"x2
3
/
8
"x
3
/
4
" (87x60x19 mm)
Weight
2.1-oz (60g)
Specifications:
1.
Determine the location where the HDMI Switcher will be installed in relation to the HDMI sources and
HDMI display.
2.
Plug the HDMI sources into the HDMI connector inputs on the front or back of the switcher.
3.
Plug the HDMI display into the HDMI connector output on the front of the switcher.
4.
Plug the USB power cable into the switcher and the other end into a powered USB port on the display or
one of the sources.
5.
Plug the IR receiver dongle into the IR receiver port and place in view of the HDMI display
6.
Turn the power on the HDMI sources and display device. Using the included remote or selection button
on the switcher, change the HDMI sources going to the HDMI display.
Installation:
