ENFORCER Basic HDMI Extender over Single Cat5e/6
4
SECO-LARM U.S.A., Inc.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2015 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole
or in part, without the written permission of SECO-LARM.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in
normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s
obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or
abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason
SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material
and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the
replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral,
incidental, or consequential personal or property damage of any kind to the purchaser or anyone else.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
PICHN3
Tel: (949) 261-2999 | (800) 662-0800
Email: [email protected]
MI_MVE-AH030AQ_151217.docx
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Troubleshooting:
HDMI device does not function correctly
•
Use T568-B wiring standard.
•
Make sure the extender is powered on both sides.
•
Make sure the source and display are powered.
•
Test the Cat5e/6 cable between the received and the
transmitter to make sure it is functional.
•
Make sure there are no problems with the HDMI source,
HDMI cables, or HDMI display by plugging the source directly
into the display using an HDMI cable.
Also Available from
SECO-LARM
®
:
HDMI Extender over
Single Cat5e/6
HDMI Extender over
Dual Cat5e/6
High-Speed HDMI Cables
Screen flickering or brief image loss
•
Use a higher grade of twisted pair category cable (Cat6 is
recommended).
•
Switch the source device to a lower HDMI output (i.e. 1080p
to 1080i)
•
Power down the unit then move the EDID switch to the
opposite position and re-power the unit.
•
Restart the handshake process by powering everything down
then powering up and connecting each device in succession
starting with the HDMI source.
MVE-AH030Q
MVE-AH010Q
MC-1102-xxxQ
