ENFORCER 1U RACK-MOUNT 16-CHANNEL ACTIVE VIDEO BALUN HUB
6
SECO-LARM U.S.A., Inc.
Cable Management:
1.
Screw the two included “G” brackets onto the mounting point on the rear of the unit with
the included M3x6 screws. Mount the brackets open end at the top.
2.
Mount the brackets and route power cables in a way that best suits your installation. Be
sure to leave slack in the cable to ease future maintenance. Use cable ties (not
included) to reduce cable tension.
Cable tie
Cable management
“G” bracket
Adjusting the Image:
1.
Locate the camera’s corresponding output on the front of the EVT-AH16-VT2Q.
2.
Adjust the Contrast and Brightness adjustment knobs by hand.
Contrast
adjustment knob
Brightness
adjustment knob
Connecting to Ground:
To earth
ground
1.
For best surge protection results, connect
the included ground wire to the ground
screw located on the back of the
EVT-AH16-VT2Q.
2.
Connect the ground wire to earth ground.
(For example, a grounded metal conduit,
a cold water pipe, or a grounding rod.)
ENFORCER 1U RACK-MOUNT 16-CHANNEL ACTIVE BALUN HUB
SECO-LARM U.S.A., Inc.
3
Parts List:
Rack-mount balun hub
...................................................................................
Cable management brackets
..........................................................................
M3x6 Cable bracket screws
...........................................................................
Mounting brackets
..........................................................................................
Rubber feet
.....................................................................................................
Power adapter
................................................................................................
Ground wire
...................................................................................................
Manual
...........................................................................................................
Overview:
Video input ports
2-wire ports on removable terminal blocks
Video input cables
Unshielded twisted pair (UTP), Cat 2 or better
Video output ports
BNC connectors, each 1Vp-p, 75 ohms
Video output cables
Coaxial
Active to active range
5,000ft (1.5km)
Passive to active range
3,940ft (1.2km)
Video format
NTSC, PAL, SECAM
Power
Dual voltage: 12~24 VAC/VDC
(1.5A@12VDC power adapter included)
Surge protection
Video
Operating temperature
32°~131° F (0°~55° C)
Size
1U, 17
3
/
16
”x6
11
/
16
”x1
3
/
4
” (437x170x44 mm)
Weight
5-lb (2.2kg)
Material
Steel cabinet, black matte finish
Specifications:
x1
x2
x4
x2
x4
x1
x1
x1
Power
LED
Contrast
Knob
Brightness
Knob
Status
LED
Video Out
port
Video Loop
port
Power input
12~24 VAC/VDC
Ground screw
Video In port
6
11
/
16
”
(170mm)
1
3
/
4
”
(44mm)
17
3
/
16
” (437mm)
