ENFORCER OSD (On-Screen Display) for Covert PIR Camera
12
SECO-LARM U.S.A., Inc.
NOTICE
:
The information and specifications printed in this manual are current at the time of publication. However, the SECO-
LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
WARRANTY
:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service
for two (2) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of
any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or
attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty
installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes
other than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be
limited to the replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral,
incidental, or consequential personal or property damage of any kind to the purchaser or anyone else.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA, 92606 Website: www.seco-larm.com
PICVN3
Phone: (949) 261-2999 | (800) 662-0800
Email: [email protected]
MiEV-668x-N3WQ_OSD_1402.docx
Language:
This function is used to select the OSD display language.
1.
Select LANGUAGE by moving the cursor UP and DOWN on the SETUP menu screen.
2.
Select the desired language by pressing the joystick button.
Camera Reset:
Select to return the camera settings to factory default.
Back:
Select to return to the previous menu diagram.
Exit:
Select to save current settings and exit the SETUP menu.
Save All:
Select to save menu settings without exiting the SETUP menu.
Troubleshooting:
The screen is blank, despite working as
before using the joystick.
•
Check that the camera is powered up.
•
Check that the monitor is powered up.
•
Check that the power supply’s polarity is correct.
FCC COMPLIANCE STATEMENT:
Information to the user: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his or her own expense.
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and
local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the
use of the product in violation of any current laws or statutes.
