ENFORCER 3X Series Vandal Rollerball Camera
8
SECO-LARM U.S.A., Inc.
POLARITY: Set the POLARITY mode.
(ACTIVE LOW or ACTIVE HIGH)
When POLARITY mode is ACTIVE LOW,
the camera will display color images in the
DAY mode and B/W images in the NIGHT
mode. When POLARITY mode is ACTIVE
HIGH, the camera will display B/W images
in the DAY mode and the image colors will
be suppressed in the NIGHT mode.
BURST: Enable noise color synchronization.
(ON or OFF)
IR OPT: Adjust the IR LED optimization
settings. (OFF or ON)
-
MODE: Set the IR compensation area. (CENTER or AUTO)
-
LEVEL: Adjust the IR LED intensity level. Adjustable range: 0~31
-
WDR: Enable wide dynamic range mode. (OFF or ON)
ATW (Automatic Tracking White
Balance):
When the image color
temperature changes, it will
automatically adjust the white balance
color temperature range from
1,800°K~10,500°K.
(Ex. A fluorescent lamp or outdoors)
SPEED: Set the ATW speed.
Adjustable range: 0~255
DELAY CNT: Set the ATW delay time.
Adjustable range: 0~255 sec
ATW FRAME: Set the ATW zone ratio. Adjustable range: x0.5, x1.0, x1.5, x2.0
ENVIRONMENT: Set the ATW environment. (INDOOR or OUTDOOR)
White Balance, continued
1.
Select DAY/NIGHT on the Main Setup Menu screen.
2.
Select the desired DAY/NIGHT setting by moving the joystick to the right or left.
3.
Select RETURN to return to the Main Setup Menu screen.
Continued on next page
Day / Night Mode:
This function will switch to color or black and white mode automatically, depending on the
current illumination conditions.
EXTON:
The camera image will switch to color in normal conditions and B/W when
ambient light is low.
