ENFORCER 4-in-1 HD 16-Channel Passive Balun Hub
4
SECO-LARM U.S.A., Inc.
Mounting Methods:
Shelf or Table Mounting:
1.
Units may be stacked one on top of the
other, or with other equipment.
NOTE:
Do not stack more than 70-lbs on
top of the passive video balun hub.
2.
Make sure the rubber feet are firmly
attached to the base of the passive video
balun hub.
Adhesive Rubber Foot
Wall Mounting:
1.
Screw the mounting brackets on, facing
downward.
2.
Use mounting screws or bolts
(not included) to mount the unit in the
desired location.
NOTE:
Make sure that the screws/bolts
and mounting surface can
support the weight of the unit.
Rack Mounting:
1.
Screw the mounting brackets onto the unit facing forward.
2.
Find 1U of space in your equipment rack and screw the unit in place.
NOTE:
No rear support rails are needed. The unit can be fully supported using the mounting
brackets provided.
*The screws included with the unit are for installing the mounting brackets. Screws for mounting the unit to an IT rack are not included.
Equipment Rack Vertical Support
Mounting
Bracket
4-in-1 HD 16-Channel Passive Balun Hub
Mounting
Screws*
Mounting
Bracket
4-in-1 HD 16-Channel Passive Balun Hub
