ENFORCER Voice Dialer
SECO-LARM U.S.A., Inc.
7
Deleting a Stored Phone Number
1.
Enter the PIN number and press the [PROG] button twice or until “MEMORY” flashes on the
LCD screen.
2.
Press the [ARM/DISARM] button to accept.
3.
Press the [#/DOWN] or [*/UP] button to select the number you wish to delete.
4.
Press the [DEL/PAUSE] button to delete the number.
5.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Learn
This function is unused.
Setting the Siren Function
This setting allows the user to choose between an audible alarm when triggered, or a ‘silent alarm’
while dialing the emergency numbers. The factory default is “ON”.
1.
Enter the PIN number and press the [PROG] button four times or until the alarm icon
(
) flashes on the LCD screen.
2.
Press the [ARM/DISARM] button to accept. The dialer will “beep” once.
3.
Press the [#/DOWN] or [*/UP] button to select either “SOUND ON” or “SOUND OFF” and press
the [ARM/DISARM] button to accept.
4.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Programming the Voice Dialer, continued:
Example 2
– To store a number with area code 1-949-555-1234, and an office extension #200
(where the called number requires a 2-second pause before the extension): After scrolling to
the desired number location, enter ‘19495551234,’ press the [DEL/PAUSE] button for 2
seconds until ‘F’ appears on the LCD screen, press the [#/DOWN] button for 2 seconds until
the ‘
┘
’ appears on the LCD screen, enter ‘200,’ and press the [ARM/DISARM] button.
Example 3
– To store a local number 555-2858: After scrolling to the desired number location,
enter ‘5552858’ and press the [ARM/DISARM] button.
5.
Repeat for the other numbers to be stored (up to 5 total).
6.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Note:
If the dialer is programmed to call a voice pager service which requires operator assistance, the
service should be notified in advance regarding the meaning of the message. Consult local authorities
concerning the permissibility of automatically dialing their emergency numbers before programming.
