Low or No Volume
• Check that the video cable connecting the
camera to the monitor is connected properly
Manual
DP-121Q
Video Door Phone
ENFORCER VIDEO DOOR PHONE
12
FCC COMPLIANCE STATEMENT
Information to the user: This device is in conformance with Part 15 of the FCC Rules and Regulations for Information
Technology Equipment. Operation of this product is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local
laws and statutes related to monitoring and recording audio and video signals.
SECO-LARM
will not be held
responsible for the use of this product in violation of any current laws or statutes.
The screen displays no image
• Check that the camera is powered up
• Check that the monitor is powered up
• Check that the power supply’s polarity is correct
• Check that the video cable connecting the
camera to the monitor is connected properly
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800 -662-0800 / 949-261-2999 Fax: 949-261-7326
Email: sales
@
seco-larm.com
Troubleshooting:
file: mi-DP-121Q_VDP(6j).cdr
WARNING
Stop using the camera if there is a malfunction like smoke or unusual heat, as that could cause a fire or electric shock. Do
not open the case of this device, as there are no field-serviceable parts inside.
The screen image is dim
• Clean the lens using a soft, clean cloth
• Adjust the brightness on the phone
The image has poor contrast
• Adjust the contrast on the phone
The image is displayed incorrectly
• Adjust the angle and/or location of camera
The phone does not ring when
• Adjust the ringer volume on the phone
request-to-enter button is pressed
PICCN2
Made in China
SECO-LARM U.S.A., Inc.
ENFORCER
Connection
E1
E2
E3
E4
Wire Color
Wire Connection Chart
Note: Please use this Wire Connection Chart when installing the camera to record the wire
colors for each connection. Make sure wire connections between monitors and
cameras are all connected correctly before powering the unit.
