WLN150x Wi-Fi Adapter
ix
Battery Operations
Prior to using the Enfora Wi-Fi Adapter, charge the new battery for a minimum of 2 hours to
obtain a full charge. The Enfora Wi-Fi Adapter derives its power from a self-contained battery
pack to ensure there is no battery drain on the handheld device.
The Enfora Wi-Fi Adapter will also charge your Treo 600/650 Smartphone if the Treo 600/650 is
placed in the Enfora Wi-Fi Adapter. The Enfora Wi-Fi Adapter
WILL NOT act as a spare battery
for the Treo Smartphone.
System Requirements
Check your hardware and software to see if they satisfy the requirements below. If you are not
sure, please consult your dealer or operator.
•
Treo 600
OR
•
Treo 650
Software Installation
1. If enclosed CD-ROM does not auto start, run the Enfora program
EnforaWiFiUSB223.exe
and follow the install wizard. The Enfora program is
located on the CD-ROM in the install directory.
2. After completing the installation you will be prompted to perform a Hot Sync®.
Dock you Palm™ device and then perform Hot Sync®.
Configuring your Enfora WLN150x
1.
First power on the Enfora Wi-Fi Adapter . The power button is located on the right-hand
side of the Enfora Wi-Fi Adapter. Next select the Enfora Wi-Fi icon from applications
on your Palm™ handheld
.
