GPS
–
MT4100
Installation
Guide
DQ
Technologies,
Inc.,
phone:
512.248.8324
‐
fax:
757.886.0831
‐
www.dqtech.com
Power
The power cable is a keyed cable and will only fit into the device one way.
The device has an input voltage range of 9 – 32 V DC. This allows the device to be used on
both 12V and 24V vehicles per SEA specifications.
Connect the power (RED wire) and ground (Black wire) of the device to the vehicle battery
leads. Connect the ignition (BLUE wire) to the vehicle ignition. The device will always
remain ON.
The device will be non-operational when the input voltage and current requirements are not
met (vehicle battery drains).
The
MT
4100
case
includes
molded
anchor
points
for
mounting
as
shown
in
the
figure
above
(facing
skyward).
Device
Mounting
Please
note
while
the
devices
needs
to
be
installed
inside
the
vehicle.
The
device
will
have
optimal
functionality
when
there
is
as
little
as
possible
between
the
device
and
the
sky.
Areas
to
consider
when
mounting
your
device:
Above
the
air
vent
Above
the
instrument
cluster
Above
the
glove
box