manualshive.com logo in svg

Enfora Mini-MT GSM2228, Быстрый старт

Поделиться
Скачать
Enfora Mini-MT GSM2228 Скачать руководство пользователя страница 11

 

3.3 Interconnections 

3.3.1 USB Connection 

 
The USB connector is used for charging the battery and for data communication.  The 
unit will charge from a laptop computer, AC to USB power adapter, or vehicle power to 
USB adapter.  (See Figure 3) 
 
Data communications with the Mini-MT is also performed through the USB connector.  
The USB connection is used to configure or customize the Mini-MT operation.  This 
connection also is used to provide GPS NMEA data to a mapping or user application. 
 

3.3.2 Headphone Jack 

 
The headphone jack provides the user with the ability to connect a headset (not supplied) 
when the speakerphone mode is not desirable.  (See Figure 3) 
 

3.3.3 Speaker 

 
An integrated speaker allows the user to make a phone call to the pre-configured dispatch 
number when in hands-free mode.  The user can adjust the volume to a comfortable level 
using the volume up (‘+’) or down (‘-’) buttons. 
 
 

!

 

WARNING 

 
The Mini-MT is used in speaker phone or headset use only.  Do not 
use the device held up to the head .  The audio levels and SAR ratings 
have not been approved for use in this manner. 

 

 
 

3.3.4 Microphone 

 
A built-in sensitive microphone allows the user to communicate with the dispatcher 
comfortably at up to 3 feet away for hands-free operation. 
 

3.3.5 SIM 

 
A SIM cardholder is located under the battery on the bottom of the Mini-MT.  The SIM 
card is required to enable the voice and data communication capabilities of your Mini-
MT device. 

GSM2228AN001                                                                                                    Page 7 

Содержание Mini-MT GSM2228














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды