Enfora GSM2374, Руководство пользователя

Страница: 30 / 45

Sets low battery threshold to 10.8volts. If below this threshold for 300 seconds (5 minutes) trigger the input
event. restoring voltage abovethe threshold for 300secods (5 minutes) will clear this event.
Check Engine Light (MIL Alert)
When the vehicle “Check Engine” light illuminates, this indicates a vehicle issue that requires attention for
diagnosis and/or repair. This is also known as a Malfunction Indicator Light (MIL). When a MIL issue is
detected through the OBDII protocol, an alert is sent from the device if the device is configured to do so.
Trip Odometer Reporting
Trip odometer reporting provides the odometer miles accumulated from ignition on to ignition off, which
is considered a “trip”.
NOTE: Ignition events are not yet detected on hybrid or electric vehicles.
Idle Time Reporting
Idle time event is triggered when the vehicle’s engine is running without the vehicle moving (i.e. velocity
less than 2 MPH) for a defined period of time in seconds (e.g. 300 seconds).
The alert is cleared when the vehicle speed exceeds another speed and time threshold.
Both the violation and clearing of the alert are reported if configured.
AT$OBDLBL=10800,300,300
Sets low battery threshold to 10.8volts. If below this threshold for 300 seconds (5 minutes) trigger the input
event. restoring voltage abovethe threshold for 300secods (5 minutes) will clear this event.
Low Fuel Alert
The low fuel alert triggers when the vehicle’s fuel level falls below a defined threshold in percent (e.g.
12%) for a defined period of time in seconds (e.g. 60 seconds).
Rapid Acceleration
Rapid acceleration events can be triggered when one of three available vehicle speed thresholds are
exceeded as determined by the accelerometer in milli-Gs (e.g. 0.75) for a defined period of time in
seconds (e.g. 30 seconds).
AT$OBDACL=1,200,1,30
- 19 -