Transition Guide
Ver. 1.00
EDG0100TG001
Page 14
Rev. 1.00 – 11/03/2005
4.0 Software
Changes
4.1 New Commands
+CGDSCONT – Define Secondary PDP Context
+CGEQREQ – 3G Quality of Service Profile (Request)
+CGEQMIN - 3G Quality of Service Profile
+CGEQNEG – 3G Quality of Service Profile
+CGCMOD – PDP Context Modify
+CGTFT – Traffic Flow Template
+CSIM – Generic SIM Access
+CIND – Indicator Control
+CMER – Mobile Termination Event Reporting
+CKPD – Keypad Control
$CGEER – Get PDP context Activation Reject
%CLCC – List Current Calls
%VTS – DTMF and Tone Generation
%CHPL – Network Operator
%CREG - Extended Network Registration Info
%CMGRS – Retransmit Failed Message
%CSCN – network Service Change Notifications
%RDL – Redial Mode
%RDLB – Redial Black List Phone Numbers
%CSTAT – Unsolicited SIM Status
%CHLD – Call Hold and Multiparty
%CPRSM – Pause Receiving of SMS
%CPKY – Press Key Mode
%CKWP – Key Was Pressed
%CNIV – Network Identity Report
%PVRF – PIN Status
%CWUP – Force Power Campaign
%SIMIND – SIM Status Indication
%CSSN – Extended Supplementary Service
%COPS – Extended Operator Selection
%CGEREP – Extended GPRS Event Reporting
4.2 Changed Commands
%CGPCO – Set the GPRS Protocol Configuration
4.3 Commands Not Currently in Use
Input/Output Commands
UDP API Commands
Dynamic IP/Wakeup-Keep Alive Commands
PAD Commands
Event Processing Commands
Real-Time Clock Commands
$HOSTIF – Configure Host to Modem Interface
$CONN – Initiate Network Connection
$DISC – Disconnect Network Connection
$LOCIP – Display Local Modem to Host IP and DNS
$NETIP – Display Network Assigned IP and DNS
$SNDMSG – Send Test Message
