17
18
4.8. ADJUST THE SUPPORT LEG
Pull out the support leg to the maximum angle.
a. Press the adjust button of support leg, hold the
support leg using the other hand and then
adjust the length of support leg.
b. When the support leg is in full contact with the
ground of vehicle, release the adjust
button. Pull the support leg to make sure it is locked.
NOTE: c. After finishing the installation of support
leg, the display window turns green.
4.7. REMOVING THE 5-POINT HARNESS AND
STORING THE PARTS
Step 3:
Storing the buckle:
Open the buckle, take out buckle tongues from
shoulder belt. Pull down buckle cross cloth cover.
Later pick up the cover in the PE board and store
the buckle (Picture E and F).
E
F
