eNet Server
Moving all blinds/shutters
￭
Press
n
button to raise the blinds/shutters.
￭
Press
o
button to lower the blinds/shutters.
Performing a restart
The eNet server can be restarted without voltage interruption via the RESTART button.
￭
Press the RESTART button (13) for longer than 10 seconds.
A restart of the eNet server is performed. The POWER LED flashes during the restart and
illuminates when the eNet server is ready for operation.
Resetting network configuration
￭
Press the RESTART button (13) for longer than 4 seconds.
The POWER,
J
and SCAN LEDs flash.
￭
To reset the network configuration to LAN with fixed IP address (192.168.0.22), press
o
button within 10 seconds.
￭
To reset the network configuration to LAN with DHCP-Modus, press
n
button within 10
seconds.
The network configuration is reset and WLAN deactivated.
Resetting users and passwords to factory setting
￭
Press the RESTART button (13) for longer than 4 seconds.
The POWER,
J
and SCAN LEDs flash.
￭
Within 10 seconds press I button for 4 seconds.
Users and passwords are reset to factory setting. A restart of the eNet server is per-
formed. The POWER LED flashes during the restart and illuminates when the eNet server
is ready for operation.
For first log-on, enter "admin" both as the username and password. For security reasons,
change the password after this.
Delete project
￭
Press the RESTART button (13) for longer than 4 seconds.
The POWER,
J
and SCAN LEDs flash.
￭
Within 10 seconds press O button for 4 seconds.
The project is deleted. A restart of the eNet server is performed. The POWER LED
flashes during the restart and illuminates when the eNet server is ready for operation.
5
Information for electrically skilled persons
5.1 Mounting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live parts
in the working environment.
Connecting external antennas
An external WLAN antenna can be connected to improve the radio range of the WLAN connec-
tion. An eNet antenna can be connected to improve the radio range between the eNet server
and installation devices.
3 / 7
32580552
10864944
01.02.2022