INITIAL SETUP FOR Wi-Fi CONTROL
1.
Connect the
WF
500D
, then turn
on the circuit
breaker.
2.
Connect your Smart Device (phone or
tablet)
to the same 2.4GHz Wi-Fi network that
your
WF
500D
smart
dimmer
will
be
connect
ing
to.
3.
Use your phone to search “
ENERWAVE
” from the App
Store
or Google Play.
Once installed, open the App and
follow the on-screen
instructions to register then
login.
F
ollow the
instructions in the
A
pp to connect the Smart
Dimmer
to your
network. Over time,
the
A
pp may be
updated for a better
experience or added
features
.
4.
Be sure to first completely read then follow the in-App
instructions closely:
a.
b.
c.
d.
Login
to
the
ENERWAVE
A
pp
On your home screen,
click on "Add
Device" or the "+"
button
Select the device type "In-
W
all
Dimmer
"
When prompted to "
Add Device
"
in the
default EZ mode
,
and the
indicator LED is
not already blinking
green
rapidly
,
press
the downward paddle
5
times and hold
down on the
6
th press
until you see three
blinking blue LED
lights, then you release
on the second
blue blink
. The LED
indicator on the
device will
blink
green
rapidly
•
When LED
indicator
starts blinking
green
rapidly
on
the
device
, press
"Confirm
indicator
rapidly blin
ks
"
•
Note: To pair the smart device using AP
Mode, simply repeat this same process
to make the indicator blink green slowly
e.
f.
Enter your
home's
W
i-
F
i
network and
password when prompted
then
click confirm
After successfully adding the device, you can
change the name of
the device
as
desired
Pairing Using AP Mode:
1
LED INDICATOR ON DEVICE
•
Solid Green:
Device is connected to a power source,
but it
has
not been paired.
•
Slow Blinking Green:
Device is attempting to pair
with
the
controller while in AP mode. When LED turns
off, the
device has
paired successfully
•
Fast Blinking Green:
Device is attempting to pair
with
the
controller while in E
Z
mode. When LED turns
off, the
device has
paired successfully
•
Solid Blue:
The device is paired and the power is
turned ON
•
No Light:
The device is paired and the power is turned
OFF
•
Select AP Mode on top right corner of your screen
•
Enter your home's 2.4GHz WiFi name and password
•
Follow the on screen instructions and select "Go Connect"
•
Select "SmartLife Network"
•
Go back to the app to continue adding the device.
SHAR
E
DEVICE
CONTROL
WITH OTHERS
2
3
Pairing Using EZ Mode (Default)
d
e
f
©
201
9
Enerwave Home Automation
WWW.
ENERWAVEAUTOMATION
.COM
020619014
3
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2
years from the date of purchase. Original receipt or proof of purchase from an
authorized retailer must be presented upon warranty claim. ALL claims must
be verified and approved by
Enerwave
, Inc. Warranties from other
Enerwave
products may vary. This warranty is nontransferable and does not cover
normal wear and tear or any malfunction, failure, or defect resulting from
misuse, abuse, neglect, alteration, modification, or improper installation. To
the fullest extent permitted by the applicable state law,
Enerwave
shall not be
liable to the purchaser or end user customer of
Enerwave
products for direct,
indirect, incidental, or consequential damages even if
Enerwave
has been
advised of the possibility of such damages.
Enerwave
’ total liability under this
or any other warranty, express or implied, is limited to repair, replacement or
refund. Repair, replacement or refund are the sole and exclusive remedies
for breach of warranty or any other legal theory.
2.4GHz Wi-Fi
4
5
6
By default, the
A
pp will only allow one user to control the paired device. To
also give other trusted users control, select the "Me"
option
on the bottom
right corner of your
Enerwave App
home screen, then click on "Add family"
to create a family that can have administrative control. Have your "Family
Member" download the Enerwave
A
pp and register. Then, click on the
created family then select "Add member" and enable the
"
Set As
Administrat
or"
option. Follow the on-screen instructions to send them an
invitation
for
administrator access.
a
b
c
