INSTALLATION INSTRUCTIONS
•
Control your lights
or small appliances
with your smart devices without
the need of any
hub
•
Easy to configure, easy to use
free s
mart App
by Enerwave
•
Save energy by automating the ON/OFF times or using the timer
•
Works with
Amazon Alexa, Google Assistant
through the Tuya App
•
Features a top "Always On" outlet and a bottom "Smart"
energy
metering outlet
•
Reduce energy consumption and enjoy wireless home automation with
Smart Meter monitoring
•
Interchangeable face covers included: White, Light Almond and Black
Model: WF
2UM
Wi-Fi
Smart
Meter
with USB
Charger
FEATURES
•
Secure 2.4GHz
Wi-Fi
network
connection
•
Smart Device such as a Smart Phone or Tablet with an operating
system of Android version 4.1 or higher or iOS
9
or higher
•
Installation of the
ENERWAVE
Smart App on the Smart Device
REQUIREMENTS
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
©
201
9
Enerwave Home Automation
WWW.
ENERWAVEAUTOMATION
.COM
0207190149
1
2
3
SPECIFICATIONS
Neutral
Hot
White
Black
Ground
Green
OPERATIONS
To replace the face cover, use a flat screwdriver and insert the tip at the gap shown in the
diagram above and pry cover off.
To re-install, simply align the cover and snap back on.
FCC COMPLIANCE STATEMENT
FCC Grant of Equipment Authorizations of this device a
nd transmitters installed in this device can be
found at FCC website by entering the FCC ID number on the device.
Caution:
Changes or modifications not expressly approved by the part responsible for compliance could
void the user’s right to operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Protocol
...........................................................
..............
........…
...IEEE 802.1b/g/n
Wireless Type
.........................
.......................
.....
............
.
.........................
.
2.4GHz
Operatin
g
Temperature....................................
..
...................
.
32°-1
04
°F
(0°-40°C)
System Requirements
............................
....Android 4.1 or higher/ iOS
9
or higher
Voltage
.................................
.................................
.........................
120VAC, 60Hz
Electronic Ballast..................................
.......................
................
.......
....
...........
5A
Standard Ballast..................................
.......................
................
...............
1200VA
Resistive..................................
.......................
................
.......
...........1800W (15A)
Motor..................................
.......................
................
.............
....................
..
1/2HP
LED
.................................
.........
.....................................................................150W
Incandescent
..................................
.......................
................
.......
....
...........
1000W
WARNING
Turn the POWER OFF at the circuit breaker before installing the
smart
receptacle.
Read and understand these instructions before installing. This device is intended
for installation in accordance with the National Electric Code and local
regulations. It is recommended that a qualified electrician perform
s
this
installation. Make sure to turn off the circuit breaker or fuse(s) and make sure
power is off before wiring the device.
Use copper wire only.
This
smart
receptacle CANNOT be used if the outlet you are replacing has
the top and bottom outlets controlled by separate circuit breakers.
WIRING DIRECTIONS
DO NOT REVERSE
ANY
WIRES.
DOING SO WILL VOID YOUR WARRANTY AND
THE
SMART
RECEPTACLE
WILL SHORT CIRCUIT.
Step 1.
Identify all your wires. Label the wires or draw a diagram of existing wires.
Step 2.
Insert wires into the terminal holes on the back, then tighten the terminal screws.
•
Connect the BLACK wire to the HOT terminal (brass screw).
•
Connect the WHITE wire to the NEUTRAL terminal (silver screw).
•
Connect the GREEN or BARE wire to the GROUND terminal (green screw).
A
LW
AY
S O
N
W
i-Fi
CLASS 2.5VDC-2.4A
A
LW
AY
S O
N
W
i-Fi
CLASS 2.5VDC-2.4A
Always-on
Receptacle
WIFI Controlled
Receptacle
Program
Button
LED
Indicator
CHANGING THE COVER
USB Output Total Amperage
................................
.......................
.......
.
.......
2.4Amp
