Enertech Bentone B 2 KA, Инструкция по установке и обслуживанию

Страница: 16 / 36

16
Bentone B 2
General
4.4 Suspension of burner
During service the burner can be hung up on the screw in the burner
lange. For this there is a hole on the right side of the burner. The blast tube,
shrouded disc, nozzle and electrodes are then easily accessible.
4.5 Removing the blast tube
1. Loosen the two fastening screws one turn.
2. Turn to the right and withdraw the blast tube.
4.6 Brake plate
The preheater plug and the electrodes shall be placed on either side of the
oil tube. If there is a hole in the brake plate it shall be placed upwards to
increase the light towards the photoresistor.
4.7 Rubber cable
Check that the rubber cable inlet is properly ixed in order to avoid unneces-
sary air leakage.