ENERSHIELD Microshield MCS-36, Руководство пользователя и инструкция по установке, Страница: 5 / 11

5
A
.
Installing on a concrete w all
3.1 To remove the mounting plate 3.2 Installing the mounting bolts properly
Unscrew the screws on the back of the main Determine where the bolt holes will be
using body to remove the mounting plate. the mounting plate and pour epoxy
3.3 When the epoxy 3.4
to the following diagram). Clamp it as shown.
Install the main body
has cured install the mounting Set the main body onto the upper
plate(secure the plate according end of the mounting plate and
B . Installing on a w ooden w al1
40-50
mm
70 mm
13-
1
5
m
m
Concrete
M ounting Plate
Washer
3.5 Fix the
mounting
plate in the pre-
measured position
with tapping screws
3.6 Same as in step 3.4 2 inches is the required
distance from the ceiling
into the bolt holes.