2
WARNING:
Immediately replace worn or damaged
parts by genuine ENERPAC parts. Standard grade
parts will break causing personal injury and property
damage. ENERPAC parts are designed to fit properly and
withstand high loads.
3.0 DIRECTIONS
VFC1 and VC2 Flow Control Valves
VFC1 and VFC2 flow control valves
provide safe, simple, and repeatable
fluid flow control at system pressures
up to 5000 psi (350 bar). The internal
check valve provides metered flow in
one direction and free flow in the opposite direction.
Precise adjustment of flow is achieved with a micrometer-
sytle adjustment knob. A set screw, located on the side of the
knob, locks the valve in the selected position. The cylinder
port is marked with "B".
4.0 INSTALLATION
Install the valve so the checked or
metered flow (from port "B") is connected
to the cylinder or hydraulic tool.
Pressure Drop Curves
Flow Direction A-B
0
200
400
600
800
1000
1200
1400
0
2
4
6
8
10
12
FLOW (GPM)
0
10
20
30
40
50
FLOW (L/min)
1
2
3
4
5 6 7
Flow Setting in Turns
14
0
20
40
60
80
100
PRESSU
RE
(bar)
PRESSU
RE
(psi)
[33,53]
1.320
[55,12]
2.170
MAX. PRESSURE 5,000 PSI [350 BAR]
2.840
[72,14]
2.556
[64,94]
SAE #4
G "
VFC1
VFC2
[28,96]
1.140
A
B
A
B