Enerpac LPL-Series, Инструкция

Страница: 3 / 8

3
Key:
1. Saddle
2. Lock Nut
3. Plunger
4. Lifting Eye (2)
5. Cylinder Base
6. Hydraulic Coupler
3/8"-18 NPTF
7. Plunger Stroke Limiter Port
8. Maximum Stroke Indicator Line
NOTICE
• Hydraulic equipment must only be serviced by a qualified
hydraulic technician. For repair service, contact the Enerpac
Authorized Service Center in your area.
• To help ensure proper operation and best performance, use
of Enerpac oil is strongly recommended.
2.3 Crush and Pinch Point Hazard (LPL-Series)
WARNING Never reach in between the cylinder lock
nut and the top of the cylinder base. Serious personal
injury can occur if cylinder is retracted and hands, fingers
or other body parts are present in this area. See Figure 1.
CRUSH AND PINCH POINT HAZARD
Do not reach in between lock nut
and cylinder base!
Figure 1, Crush and Pinch Point Hazard
2.4 Additional Safety References
Consult the applicable industry and/or government standards
in your country or region for additional safety precautions and
work rules applicable to hydraulic cylinders, jacks and other
similar lifting equipment.
In the USA, refer to the following publications:
• Code of Federal Regulations - Title 29 Occupational Safety
and Health Standards (U.S. Government Publishing Office,
732 North Capitol Street, NW, Washington, DC 20401-0001.
www.gpo.gov).
• ASME B30.1 Standards - Jacks (American Society of
Mechanical Engineers, Two Park Avenue, New York, NY
10016-5990. www.asme.org).
In the European Union, refer to the standards and directives
listed in the product's EU Declaration of Incorporation. A copy
of this document is packed separately with the cylinder.
3.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS
Enerpac declares that this product has been tested
and conforms to applicable standards and is
compatible to all CE Requirements. A copy of an EU
Declaration of Incorporation is enclosed with each shipment of
this product.
4.0 PRODUCT DESCRIPTION
Enerpac LPL-Series low height lock nut cylinders are an ideal
solution for a wide variety of commercial and industrial lifting
applications.
All LPL-Series cylinders are single-acting, with hydraulic
advance and load return. An integral lock nut allows the load
to be mechanically supported when hydraulic pressure is
relieved.
Capacities range from 68 to 575 US tons [606 to 5114 kN].
Refer to the product data markings on the cylinder base for the
capacity rating of your cylinder model.
All standard production LPL-Series cylinders are designed for
10150 psi [700 bar] maximum working pressure.
The LPL-Series cylinders have no stop ring. A maximum stroke
indicator line alerts the user when the plunger has reached its
full allowable extension. In addition, a built-in stroke limiter
port relives hydraulic pressure in the event that the plunger
maximum stroke limit is exceeded.
An integral tilt saddle is included on all models.
Refer to Section 11 of this manual for cylinder weights, oil
volumes, dimensions and additional specifications.
Figure 2, Major Features and Components
Sectional View
1
7
2
4
5
3
8
6
1
7
2
4
5
3
8
6