Enerpac HMT Series, Руководство по эксплуатации и обслуживанию

Страница: 11 / 44

L4478_a 9
3.2 Feature Description
3.2.1 Assembling HLP/ HSQ Cassette
Assemblies onto HMT Drive Unit
The HLP and HSQ cassette assemblies each include
a hook feature as part of the body assembly, this is
inserted around the top retaining pin of the drive. The
cassette assembly rest along the base of drive unit body.
At this point, the bottom retaining pin holes in the drive
unit body and cassette assembly will align, allowing the
bottom retaining pin to be inserted fully to secure the
two together.
3.2.2 Engaging HMT Drive Unit Rod End
with HLP/ HSQ Cassette Drive Plate
Assembly
When assembling the HLP or HSQ Cassette onto the
HMT drive unit body ensure that the rod end of the
drive unit is fully engaged with the drive pin in the drive
plate of the cassette assembly by rotating the ratchet or
square drive 1/4 turn back and forth a number of times by
hand until engagement is confirmed.
Failure to ensure correct engagement of
the wrench body and drive plate assembly drive pin
prior to operation will damage the rod end. Resulting
damage will not be covered under warranty.
3.2.3 Using Extended Reaction Arm/
Reaction Paddle with the HMT with HLP
Cassette
To use the HMT with the HLP Cassette, a suitable
reaction surface must be available.
If bolt spacing is such that the reaction surface of the
wrench does not reach a suitable reaction surface such
as an adjacent bolt, use the extended reaction arm or
reaction paddle as depicted. This will allow reaction to
be taken against the side of the flange.
To attach the reaction paddle or extended reaction arm,
remove the standard bottom retaining pin, align the
holes of the reaction paddle or extended reaction arm
with that of the reaction surface of the wrench, insert the
long retraining pin to secure.
Ensure the reaction paddle or extended reaction arm
extends in the appropriate direction: right for tightening;
left for loosening.
CAUTION
Figure 4: Connecting HLP Cassette and HMT Drive
Unit
Figure 5: Connecting HSQ Cassette and HMTDrive
Unit
Figure 6: Installing Reaction Paddle
Figure 7: Installing Extended Reaction Arm