12
© 2016 Enerpac, All Rights Reserved
ETW Series Electric Torque Wrench
3.4.2 Shoulder Strap Installation
Instructions:
1. Fully install the eyebolt into the threaded hole at the top of the housing.
2. Attach one end of the shoulder strap to the eyebolt. Attach the other end of the shoulder strap to the
metal loop at the base of the wrench grip. Be sure that both clasps are fully closed.
3. Adjust the shoulder strap to the shortest possible length that will allow sufficient range of movement
during use. Remove any excess slack.
1 - Eyebolt
2 - Clasp
3 - Shoulder Strap
4 - Metal Loop
Fig. 4
1
2
3
2
4
