6
IM_SWi_EX_Rev14
Figure 3:
Setting an imperial torque [in ft·lb] is done in exactly the
same way.
Figure 4:
Lock the handle by turning the locking knob clockwise.
Install the supplied socket onto the Torque Wrench and
attach to the tool.
Slowly and smoothly pull the handle, gradually applying
more force until you feel or hear the Torque Wrench click,
indicating that the selected torque has been achieved.
Do not continue to apply force after the Torque Wrench
has clicked. Special care should be taken when using
low torque settings.
Torque Wrench Care
Prior to storing the Torque Wrench, and between use,
leave the Torque Wrench with its lowest torque setting
selected.
To clean the Torque Wrench, wipe gently with a damp
cloth. Avoid using any detergent or solvent as this may
detrimentally affect the factory-fitted internal lubrication
of the mechanism.
Actuating The SWi12/14TMEX
Follow the Spreading Wedge Tool Operation
instructions, using the following instructions to actuate
the SWi12/14TMEX tool in particular:
Actuate the tool by manually applying force to the torque
wrench in the clockwise direction (see Torque Wrench
Usage). Gradually increase the torque setting of the
Torque Wrench over several steps, for example 30 N·m
[or 20 ft·lb] each time. Do not exceed the maximum SWL
torque of 175 N·m [130 ft·lb].
When using multiple tools, ensure that the torque settings
of all wrenches correspond to keep the spreading force
balanced.
Retracting The SWi12/14TMEX
Retract the tool by manually applying force to the torque
wrench in the anti-clockwise direction. When using
multiple tools, work around all wrenches to keep the
spreading force balanced as the gap is closed.
3.2.3 Operating Conditions
Grease Limitations:
Minimum Temperature:
-5 °C [23 °F]
Maximum
Temperature:
40°C
[104 °F]
Mechanical Tools:
Minimum Jaw Contact Temperature:
-30 °C [-22 °F]
Maximum Jaw Contact Temperature:
150 °C [302 °F]
3.2.4 SWi12/14TMEX Kit Contents
Standard Kit
1 x SWi12/14TMEX Mechanical Spreading Wedge
Wedgehead
1 x Mechanical Cylinder
1 x Torque Wrench with 22 mm Socket
1 x Set of Safety Blocks
1 x Pair of Stepped Blocks
1 x Lanyard
1 x Hex Key
1 x Instruction Manual
1 x Carry Case
1 x Carry Case - 580 mm x 400 mm x 180 mm
[22.8" x 15.7" x 7.1"]
Gross kit weight:
17.0 kg [37.5 lb]
Tool only weight:
6.2 kg [13.7 lb]
Содержание Equalizer SWi12/14TMEX
Страница 2: ......
