Installation & wiring
*
3. Gently position wires in wall box, attach sensor switch to the box.
2. Device “TOP” upward.
4. Restore power at circuit breaker or fuse, wait one minute.
5. Locate the toggle switch on both sides of the top cover to perform
test and adjustment.
Your switch ships with top cover attached. It is convenient for users to
OPEN
CLOSE
Line up tabs and push up to attach
Changing the color of your switch
1.
2.
Figure 3
Push down top cover to release
change the top cover. Please proceed as follows:
1.
Connect RED wire from sensor to the LOAD wire.
2.
Connect BLACK wire from sensor to the HOT wire.
3.
Connect WHITE wire from sensor to the NEUTRAL wire.
NEUTRAL
WIRE IS REQUIRED.
4.
Connect GREEN wire from sensor to the GROUND wire.
Wiring Diagram
Figure
2