Energy TV Player 150, Руководство пользователя

Страница: 20 / 23

45
EN
G
LI
S
H
7. TROUBLESHOOTING
If you experience problems with this receiver or its installation, in the first instance
please read carefully the relevant sections of this User Manual and this Troubleshooting
section.
Problem Possible cause What to do
Standby LED not lit.
Your TV Player 150 is
unplugged. Check the connections and
ensure that the TV player is
plugged.
No picture.
The Connection of TV
audio and video output is not
correct. Check that you have
connected the correct cable
for the output of the video
signals.
No response to
remote control.
Receiver off Plug in and turn on receiver.
Front panel obstructed Check for obstructions.
Remote control batteries are
inserted incorrectly Check batteries direction.
Remote control batteries
exhausted. Replace remote control
batteries.
No Sound.
Volume is too low.
Check if the volume ofyour
TV Player or TV is set to an
adequate level.
Mute is active.
By pressing the mute button
on the remote control you
can desactivate the mute
function.