Energy CineLED 19", Руководство пользователя

Страница: 10 / 32

49
EN
G
LI
S
H
PLaCING The baTTeRIeS
remove the remote control battery cover and place two aaa batteries.
Put the battery cover back on.
Be sure to replace the batteries in correct direction.
if remote control range decreases replaces the batteries. Do not recharge, neither disarm nor
heat batteries.
The misuse of batteries can cause leaks that may damage remote control.
Save the batteries out of the reach of children. if a person swallows a battery must receive
medical help immediately.
Do not try to recharge batteries.
Don’t throw batteries in fire, disassemble or short circuit them. Change the batteries at least once
a year to avoid spilling them. Changes the two batteries at the same time and replace them by
others of the same type.
When the remote control will not be used for a long time, please remove batteries.
Do not expose the remote command unit to splashing of liquids, sources of heat or direct sunlight.
USing THE rEMoTE ConTroL
To use the remote control point it to the ir receiver.
The remote control has a maximum range of 6 mt. from the receiver in an angle of up to
±
30°.
if batteries are low, the command may not work correctly, so it is recommended to replace the
batteries immediately.
The remote will not work if the path to the receiver is blocked.
Direct sunlight or very intense light can reduce the remote control sensitivity.