Energy BRAVO 600*400
Energy BRAVO 800*500
42
600
400
144
800
500
144
2,3
80
3,1
ELECTR ICAL
TOWEL WARMER RACK
SERIES
“ENERGY BRAVO”
USER MANUAL
AND INSTALLATION
GUIDE
Range of goo ds.
Model
Power
W
H
m
W
m
D
m
Weight
kg
Dear customer! Thank you for choosing our product! Electrical towel warmer
rack Energy has passed through many tests to meet the requirements of high
quality product. We hope it will meet your expectations and will be effective
while using.
Please, read this user-manual careful and keep it safe during the whole
operation period for this product.
Function s.
This is a domestic appliance, which is used for drying of towels and other
clothes. Caution! The surface temperature can be up to 58C
o
, delicate clothes
must be placed on towel warmer rack only over the layer of other thermostable
material. This appliance should not be used as the room heater.
Instal lation .
Caution! It is highly recommended that the installation procedure is processed by
trained personnel.
1.
Power off the towel warmer rack and the electric source before installation
and maintenance.
2.
Mark the position for drilling holes for wall brackets and connection box on
the wall. For
concealed
electric
connection
in
wall conduits the
connection box
must be placed
over the electric
wire
outlets
from the wall
socket.
3.
Drill the holes
for wall brackets
and connection
box (see figure
2).
4. Place the
bracket washers
between the
wall brackets
and
the wall to
avoid water
leakage
(see figure 3)
5.
Fix the upper wall bracket using one screw and expanding nut (supplied as
accessories).
6.
Connect the electricity through the connection box (according to
the chosen type of electrical connection see below the points A or B)
Caution! Make sure that no cables get jammed between the wall and connection
box while energy source connecting.
À. Concealed electrical connection.
1.
Move the connecting plinth out of connection box. Remove about 5mm
insulation layer from the electrical leads and connect them to the connecting
plinth.
2.
Put the connecting plinth in the protecting cover, fasten the two parts of
protective cover by the small screws and place it inside the connection box
(see figure 4).
3.
Fix the wall brackets and connection box with the big screws and expanding
nuts (supplied as accessories).
Caution! The loose supply cord may be a fatal ris k – make sure that it does not
end up in the wrong hands and keep it in a save place.
B. Electrical connection by supp ly cord to the wa ll socket.
1. Move the small round plastic cover out of the bottom
part of connection box.
2. Place the cable’s holder in the round hole and fix it
inside the connection box using the hexangular
plastic nut.
3. Put the catch-nut on the cable and pass the cable through
the cable’s holder inside the connection box.
4. Remove about 5mm insulation layer from the leads
of cable and connect them to the connecting plinth.
5. Fix the cable in cable’s holder using the catch-nut.
6. Fix the wall brackets and connection box by the big screws and expanding nut
s
(supplied as accessories) on the wall.
7. Connect the supply cable with plug to the standard electrical
wall socket 220/230V, 50-60Hz.
The towel warmer rack has the protection class II (double electrical insulation
layer) and should not be ground.
Operation an d cleaning.
Caution! To avoid the damage of towel warmer rack and the receiving of injure
it is prohibited to disassemble the towel warmer rack and to use towel warmer
rack disassembled.
Make sure that the towel warmer rack is installed correctly and securely before
the first switch on.
Towel warmer rack is equipped by the power switch (ON/OFF) with red light
indicator on the bottom of connection box. Towel warmer rack can be used in ON-
mode twenty-four hours a day.
The towel warmer rack could be cleaned by a soft damp cloth or by using
dishwashing liquid. Caution! Do not use any abra sive or aggressive cleaners,
which could damage the surface of towel warmer rack.
Security mea sure.
1.
Be careful while transporting of towel warmer rack – do not expose it by
mechanical and thermal failure.
2.
The towel warmer rack must not be affected by direct water stream.
3.
The supply cord must not touch the heating surface.
4.
Do not take off the plug from the wall socket by pulling the supply cord and
do not touch the plug by wet hands.
5.
In case of damage of towel warmer rack switch it off immediately and call for
service center.
6.
It is prohibited to use the towel warmer rack if it has some damages or if the
electrical wiring (electrical supply network) has some faultiness.
Complete set.
Towel warmer rack - 1
pc
. Supply cable with plug - 1
pc
.
Cable’s holder -1
pc
. Hexangular plastic nut - 1
pc
.
Catch-nut - 1
pc
. Protective cover - 1
pc
.
Small screw - 3
pc
. Big screw - 8
pc
.
Expanding nut - 8
pc
.
Bracket washer - 4
pc
.
Wall bracket – 3
pc
. User-manual - 1
pc
.
Technical da ta.
Supply Voltage: 220-230V, 50-60Hz
Power consumption: see on the marking
Protection class: IP 44
Mounting: supply cord/ concealed connection
Max. surface temperature: 58C
o
Certification: CE, GOST
Figur e. 5
Figur e. 4
Figur e. 3
View from abov e
Figur e. 2