Energy Systems & Design Easy Tune Stream Engine, Руководство пользователя

Страница: 11 / 23

11
OUTPUT ADJUSTMENT
The Easy Tune Stream Engine has the unique feature of being adjustable for
maximum power while it is running!
When the machine is fully installed and running, it can be easily adjusted for maximum power. This is
done by measuring the output current or amps while the machine is generating power. Simply use your
digital multi-meter to determine the highest output reading and set the machine at that point. In a battery
system, the current is measured by connecting the meter that is supplied with the machine to the red and
black jack as shown in the photo. The weather cover is lifted off after backing off the wingnuts that
retain it. With the meter set for 200 DC millivolts (nine o’ clock position) it will read directly in amps.
The DC output voltage can be read by setting the meter on the DC volts position (20, 200 volts) and
using the black and white jacks as shown in the photo.
Once the meter is connected and the machine is operating, the upper body of the machine is rotated
slightly using the two big knobs on the sides of the machine. First these are loosened and then the body
of the machine can be moved while you are observing the output as shown in the photo. What you are
looking for is the highest number on the meter. When this is found, the knobs can be tightened and no
further adjustment is necessary unless there is a nozzle change. Note that there are two small screws that
limit the movement of this adjustment that correspond to maximum and minimum magnetic
engagement.