or liquid damage voids the warranty.
Important Handling Information
WARNING: If you do not follow these handling instructions, you could damage your Xi3 NUC, other property and void
the warranty.
Transporting or Carrying your Xi3 NUC – If you need to carry your Xi3 NUC from one place to another, we recommend carrying it inside a
padded bag or carrying case. If you are shipping your Xi3 NUC, please pack it securely inside a box or shipping container with an
appropriate amount of padding to protect it during shipment. In either instance, please ensure that there are no small loose objects inside
the shipping box, bag or carrying case.
Avoid Powerful Magnets – Your Xi3 NUC contains long- and short-term memory/storage solutions that can be erased if they come in
contact with or close to a powerful magnet.
Protect Connectors & Ports – Make sure that all ports on your Xi3 NUC DO NOT contain any debris before attempting to connect a cable
or device to the ports. It is important that you correctly align the correct cable/connector with the proper port. And never attempt to force a
connector into a port.
Environmental
The below table lists the environmental specifications for the board:
Environmental Specifications
Parameter
Specification
Temperature
Non-Operating
-40 °C to +60 °C
Operating
0 °C to +50 °C
Shock
Unpackaged
50 g trapezoidal waveform
Velocity change of 170 inches/s
2
Packaged
Half sine 2 millisecond
Product Weight (Pounds)
Free Fall (inches)
Velocity Change
(inches/s
2
)
<20
36
167
21-40
30
152
41-80
24
136
81-100
18
118
Vibration
Unpackaged
5 Hz to 20 Hz: 0.01 g
2
Hz sloping up to 0.02 g
2
Hz
20 Hz to 500 Hz: 0.02 g
2
Hz (flat)
Packaged
5 Hz to 40 Hz: 0.015 g
2
Hz (flat)
40 Hz to 500 Hz: 0.015 g
2
Hz sloping down to 0.00015 g
2
Hz
.
Cleaning your Xi3 NUC – To remove dust from (or buff the outer chassis of) your Xi3 NUC chassis, use a clean, lint-free soft cloth. DO
NOT spray any type of cleaning solution or apply any liquid cleaner directly to your Xi3 NUC at any time, but especially when the computer
is turned on or running.
In fact, if you need to use a liquid cleaner to clean the outer chassis of your Xi3 NUC, turn off your computer first (see Page 8). Then apply
only enough liquid cleaner to a clean and soft cloth so as to dampen the cloth, and use this dampened cloth to clean the outer chassis of
your Xi3 NUC.
If you notice an accumulation of dust inside the chassis, use a liquid-free, compressed air aerosol can to spray out the inside of your
computer. DO NOT use liquids of any type to attempt to clean the Boards or components of your Xi3 NUC. Doing so will void the warranty.
Regulatory Information
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
