6/8
energysistem.com
to charge the battery.
The STATUS INDICATOR (4) will glow red while charging the device and will turn blue once the charging process has
been completed. Plug the microUSB end of the USB cable provided into the CHARGING PORT (5) of your earphones and
the other USB end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger,
etc) to charge the battery. The charging time is approximately 3 hours.
Important considerations:
Do not store or leave your device unused or completely discharged for a long period of time.
Bluetooth pairing
Once your Earphones Neckband 3 Bluetooth are off, press and hold the MULTIFUNCTION BUTTON (3) for approximately
4 seconds, until the STATUS INDICATOR (4) starts flashing red and blue. At this point, your earphones and your
Bluetooth device can be paired. Once "Neckband 3" appears on your devide screen, press "connect". You will hear a
sound that confirms that both devices have been paired correctly.
If you previously paired your Earphones Neckband 3 Bluetooth with a device, they will connect automatically next time
you turn them on. In case that you want to pair them with another device, repeat the pairing process (press and hold
the MULTIFUNCTION BUTTON (3) for 4 seconds).
Bluetooth playback control
Once your Earphones Neckband 3 Bluetooth are syncronized, you will be able to control basic playback functions such
as turning up and down the volume and switching to the next or previous track directly from your earphones.
Press (1) and VOLUME - (2) to turn up and down the volume respectively. You will hear a sound when
reaching the maximum and minimum volume levels.
Press and hold NEXT (1) to switch to the next song. You can also press and hold BACK (2) to go back to the previous
song.
Press the MULTIFUNCTION BUTTON (3) once to pause or resume playback.
Call control
Once your Earphones Neckband 3 Bluetooth and your smartphone are synchronized, you will be able to answer calls
thanks to the built-in MICROPHONE (6) while using your earphones.
Press the MULTIFUNCTION BUTTON (3) to answer an incoming call. If you are listening to music when you receive a call,
playback will pause and you will hear an incoming call sound. Press and hold this button for 2 seconds to reject an
incoming call.
Press the MULTIFUNCTION BUTTON (3) again to end a call. Playback will resume from the point when the music stopped.
Magnetic function
The earbuds of your Earphones Neckband 3 Bluetooth have magnets on the back that allow you to keep them together
when not using the earphones. This way you can always carry them with you and listen to your music any time.
