7/8
energysistem.com
MicroSD player
Play .mp3 and .wav files stored on removable microSD cards (up to 64 GB). After inserting the memory card and moving
the Bluetooth / MicroSD slider (5) to the SD position, playback will start automatically.
The track you are listening to will be saved to the internal memory when turning off the headphones or removing the
storage card. If you connect the same removable storage unit once again, playback will resume from the last track you
listened to.
Press and hold (6) or Volume - (7) to switch to the next or previous track.
The folders and files stored on your removable storage units will be read in chronological order.
Press the Multifunction button (9) twice to move to the next memory card folder.
Press the Multifunction button (9) three times to enable shuffle mode. Pressing the same button three times once again
will disable this mode.
Important To prevent the microSD card from being easily removed or manipulated by children, insert or remove the
card with a paper clip.
Call control (hands-free function)
Once your headphones are paired with your smartphone via Bluetooth connection, simply wear your headphones and
you will be able to answer calls thanks to the Built-in microphone (15).
Press the Multifunction button (9) to answer an incoming call. When receiving a call, the song you are listening to stops
and the ringing tone sounds instead. You can also press and hold this button for 2 seconds to reject the call.
Press the Multifunction button (9) once again to end a call. Playback will resume from the point at which it stopped.
Using the jack cable
To start using your Lol&Roll Pop Kids Bluetooth Headphones plug the Line-in jack (12) into the headphones’ Line-in (3)
and the other cable end into your smartphone or PC.
Note: We recommend leaving a distance of approximately 5 cm between lips and microphone to ensure optimal
performance.
Connecting two sets of Lol&Roll Headphones
To connect two sets of headphones to the same music player, connect the Line-in jack (12) to the headphones' Line-in
(3) and the other cable end to your smartphone or PC.
Then connect the Line-out jack (14) of the second cable to the Line-out (4) on the first set of headphones. Once you've
done this, connect the Line-in jack (12) of the very same cable to the Line-in (3) on your second set of headphones. At
this point you can listen to music through both sets.
Note: You will not be able to control playback from the second set of headphones while this mode is enabled. Use the
control built into the cable connected to the music player instead to skip to the previous/next song or pause music.
Controls
Press the Multifunction button (9) to control music playback. Press this button once to pause/resume playback. Press it
twice to skip to the next track. Press it three times to skip to the previous track.
Music Share
Enjoy music together. You can do this using the Bluetooth connection, microSD cards or the audio jack. Just connect the
Содержание Lol&Roll Pop
Страница 2: ...2 8 energysistem com ...
