ENERGY SISTEM Headphones 1 Bluetooth, Быстрый старт, Страница: 6 / 8

6/8 energysistem.com
Charging the battery
You will hear a warning sound when your headphones are about to run out of battery. This sound will be heard every
few minutes until the battery is completely discharged. Connect the micro USB end of the included USB cable to the
PORT TO CHARGE THE BATTERY (4) and the other USB end to any device with an USB port that can provide energy (PC,
USB wall charger, car charger, etc) to charge the battery. The INDICATOR (5) will glow red. Once the battery is fully
charged, the indicator will turn off.
Important considerations:
We recommend turning off the device when charging.
Do not store or leave your device unused for a long period of time with an empty battery.
Bluetooth pairing
Once your Headphones 1 Bluetooth are off, press and hold the MULTIFUNCTION button (2) for 4 seconds and the
INDICATOR (5) will start flashing blue and red. At this point, your Headphones 1 Bluetooth will be trying to pair with
another Bluetooth device. Start then the search and pairing process from your Bluetooth device (smartphone, tablet,
laptop, etc). Once your Headphones 1 Bluetooth appear on your device screen, select "connect". The devices will be
connected immediately without codes and the INDICATOR (5) will start flashing only in blue, which means that the
device is on and has been correctly paired.
Your Headphones 1 Bluetooth will automatically turn off after 10 minutes if they are in Bluetooth mode and not
synchronized with any device.
Playback control
Once your Headphones 1 Bluetooth are paired, you can control basic playback functions such as turning up and down
the volume, switching to the next or previous song and pausing and resuming playback directly from your headphones.
Press and hold the NEXT button (1) to switch to the next song. You can also press and hold the BACK button (3) to
switch to the previous song.
Press the (1) and VOLUME - (3) buttons to turn up and down the volume respectively. You will hear a beep
when reaching the maximum volume level.
Press the MULTIFUNCTION button (2) once to pause or resume playback. Your Headphones 1 Bluetooth will
automatically turn off if you pause playback for more than 10 minutes in order to save battery.
Audio input
In addition to all modes explained so far, you can also connect your Headphones 1 Bluetooth to your music player
through the included audio cable if you run out of battery or simply do not want to use the wireless connection.
Turn off your Headphones 1 Bluetooth and connect your cable to the AUDIO-IN (7) to use this mode.
NOTE: Playback control function is not supported in this mode. Therefore, you will have to use the player connected to
your headphones to turn up and down the volume, switch to another song or pause playback.
Call control
Once your Headphones 1 Bluetooth and smartphone are synchronized, you will be able to receive calls and use the
MICROPHONE (6) to talk while you wear them.
Use the MULTIFUNCTION button (2) to answer an incoming call. If you are listening to music when you receive a call,
playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to
reject an incoming call.
Press the MULTIFUNCTION button (2) again to end a call. Playback will resume from the point it has been interrupted.
You can also press twice the MULTIFUNCTION button (2) while you are listening to music to dial the last telephone
number in your smartphone's call log.