Fasten the vibration damper to the leg with
M8 nut, with a socket wrench.
4
Mark on the ground where the installation
holes will be drilled.
Use a power drill with drill bit of diameter
8mm to drill the ground.
Put expansion bolts in the holes of ground. Put
the standing on the expansion bolts according to
the holes in the metal feet, and fix the standing
with a wrench.
Put the outdoor unit on the vibration
dampers of standings.
Fasten the outdoor unit to vibration dampers
with M8 nuts and washers. Make sure that you
have the required distance between the back of
the unit to the wall.
