Energy micro EFM32 Giant Gecko Starter Kit, Руководство пользователя

Страница: 8 / 31

...the world's most energy friendly microcontrollers
2012-05-31 - t0014_0.11 8
www.energymicro.com
Figure 5.3. Touch Slider
Touch Slider
PC10 (ACMP1_CH2)
PC11 (ACMP1_CH3)
PC8 (ACMP1_CH0)
PC9 (ACMP1_CH1)
UIF_TOUCH0
UIF_TOUCH1
UIF_TOUCH2
UIF_TOUCH3
EFM32 MCU
The capacitive touch slider works by sensing changes in the capacitance of the pads when touched by a
human finger. Sensing the changes in capacitance is done by setting up the touch pad as part of an RC
relaxation oscillator using the EFM32's analog comparator, and then counting the number of oscillations
during a fixed period of time.
5.4 Ambient Light Sensor
The kit has a light sensitive, transistor type, ambient light sensor connected to the low energy sensor
interface of the EFM32 Giant Gecko MCU. The sensor is placed above the push buttons and can be
used to sense changes in ambient light levels.
Figure 5.4. Light Sensor
LIGHT_EXCITE
LIGHT_SENSE
22K
TEMT6200FX01
PD6 (LES_ALTEX0)
PC6 (ACMP0_CH6)
EFM32 MCU
Two pins are used for the light sensor operation: one for excitation, and one for sensing. The sense pin
is connected to ACMP0 CH6. Both the excitation pin and the sense pin can be controlled directly from
the EFM32's LESENSE module.
5.5 LC Sensor
In the bottom right corner there is an inductive-capacitive sensor for demonstrating the low energy sensor
interface. By setting up oscillating currents in the inductor, metal nearby the inductor can be sensed by
measuring the oscillation decay time. The effective range is a few millimeters.
Figure 5.5. LC Metal Sensor
PB12 (DAC0_OUT1)
PC7 (ACMP0_CH7)
EFM32 MCU
100 nF
3
3
0
p
F
3
9
0
u
H
1.5K
DAC_LC_EXCITE
LES_LC_SENSE
Met al Object
5.6 NAND Flash
A 32MB NAND Flash is connected to the external bus interface of the EFM32 Giant Gecko MCU. The
interface is a simple 8-bit parallel interface. This peripheral demonstrates the EFM32 Giant Gecko's EBI
module's NAND support with built in ECC generation.