Energolux SAP24P1-A, Руководство по обслуживанию

Страница: 12 / 46

Select suitable position to make according to the location of indoor and outdoor units.
Position of the pipes
Torque
Pipe connection
The size
of pipe
Pipe and Drain pipes Connection-Indoor Unit
Liquid pipe
Tighten rope
Shelf
Vapor pipe
Angle hole
Interface
Drain hose
in the accessory case
Thermal insulation drain pipe
Through-flow
fan leaves
fresh air tube
Take the pipes out of the accessory case.
Pull the pipes and cables from the holes and turn away the block
things in the pipe.
Turn away the stopper in the connection pipes of the indoor unit.
Oiling bell-bottom of the pipe connection and the inner of sealing.
Align the pipes,connected with the screw with a torsion wrench.
The torque list in the table below.
Wrap the connected position of thermal insulation pipes.
The drain should be downwards.
Drain pipes connection
Tighten the interface.
Wrapping from 10cm to the plug
of indoor unit with plastic belt.
Make the pipe,cable to power
and cable to signals in order.
Make sure of the streching
direction and the smoothly
surface of the drain.
Wind pipe connection
for ZV series
Side wind tube downward
Tighten tie-in
Attach
Technical Manual of Energolux Room Air Conditioner
12