Energizer EZ40VTDE40N, Руководство пользователя

Страница: 10 / 19

-
Place the upper handle on the lower handle. The
holes must be aligned
-
Insert the cam locks and screw them with the wing
nuts.
d.
Unfolding and adjusting handle assembly
To raise handle assembly
-
Pull up and back on the lower handle (F) until
it is aligned with the hole position of the arm
support and the mower housing.
-
To secure the lower handle (F) in place, lock
the lower screw (M).
-
Open the upper cam locks (H).
-
Pull up and back on the upper handle to raise
it into operating position.
-
To secure the upper handle in place, close the
upper cam locks (H).
NOTE: If the upper handle is loose or
separated from the lower handle, tighten the
knobs on the upper handle locks by turning
them clockwise.
To lower the handle assembly
-
Open the upper cam locks (H).
NOTE: If the handle lock is difficult to open, loosen
the knobs on the upper handle locks by turning them
counter clockwise.
-
Lower the upper handle.
-
Unfix the lower screw (M).
-
Fold the handle to the front of the unit.
-
Avoid pinching or trapping any cables.